1. What do I do if there is no heat at all?
- Is the heat setting turned on and the thermostat set?
- Check for blown fuses or a tripped circuit breaker.
- Try setting the thermostat in the "fan" position to see if it comes on.
- Check to see if the furnace is plugged in. Is there power to the outlet?
- Call a qualified professional.
2. What do I do if my rooms aren't warm enough?
- Replace the filter in the furnace.
- Clean the registers and remove any obstruction blocking the registers.
- Seal the leaking heating ducts with duct tape.
- Call a qualified professional.
3. Soot is all over the place, what do I do to stop it?
- Replace the filter in the furnace.
- Call a qualified professional to clean your entire heating system.
4. Furnace not blowing hot air?
- Make sure the gas cock on the gas flex leading to the unit is in the on position (parallel to the gas pipe)
- Make sure the pilot is lit. Call a professional if not.
- Make sure the thermostat is in the heat mode and desired temperature is set above room temperature.
- Be sure to check the filter has been changed.
